Victron Energy EasySolar 12/1600/70-16 MPPT 100/50 12 Volt Off Grid


EasySolar 12V / 1600 watts with built in MPPT 100/50

All-in-one solar power solution

The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.

The product is easy to install, with a minimum of wiring.

The solar charge controller: Blue Solar MPPT 100/50

Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.

The inverter/charger: MultiPlus Compact 12/1600/70

The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC.

power (inverter/charger) from the utility grid or a genset.

AC distribution

The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers.

One 16A output is controlled by the AC input: it will switch on only when AC is available.


Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Unique solar application software

Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.

Victron's EasySolar allows you to quickly install a complete solar and electrical system using only one main piece of hardware. EasySolar combines multiple functions into one, easy to use unit, making it the perfect solution for your motorhome, narrowboat or home office:

1600W pure sine wave inverter

70A advanced battery bank charger

4A starter battery charger

Auto-transfer to 240V (shore power or generator)
50A MPPT solar charge controller (700W @ 12V)

Integrated RCB's (fuse box) for power distribution

MPPT solar charge control

Based on Victron's BlueSolar MPPT 100/50 solar charge controller, the EasySolar allows you to connect up to 700W of solar panels. Using Victron's latest, ultra-fast, MPPT algorithms and their unique Battery Life Protection, you will produce up to 10% more charging power than other MPPT controllers.

Pure sine wave inverter

The MPPT charge controller and the inverter/charger share the DC battery connection, so you need only one cable set. When the battery bank is charged, the EasySolar works on DC and provides up to 1600W of 240V continuously. Some electrical items, such as motors, have a power surge when they first start; the EasySolar is designed to cope with short-term peaks of up to 3000W. When EasySolar detects a 240V input (from shore-power or a generator), it automatically switches away from the DC batteries and uses the AC. This changeover happens in about 12-milliseconds, meaning that even sensitive computer equipment should continue running seamlessly. When using AC, the EasySolar feeds up to 16A directly into your electrical system and uses any surplus power to boost charge the batteries.

Battery charger

EasySolar has an integrated 70A charger for the main battery bank as well as a separate 4A charge connection for a starter battery.

240V AC distribution

If you are fitting 240V for the first time in your narrowboat, home office or motorhome, you would normally need to fit a consumer unit (fuse box) and RCB's. However, EasySolar makes this even easier than ever, by integrating all of the necessary RCB's. There are four separate AC outputs, all with their own RCB. One of these is only active when shore=power or a generator is connected - the other three are permanently active.

For ease-of-use, the Victron EasySolar is second to none!